Getting error message the trying to run the 'Start.bat' file

Jager

Hello,

I have setup SIA miners on a few other computers now and they are mining away fine. But now I want to use some of my older computers as well. However when I try to start it on one of my older computers I get this error message in cmd. Any ideas of what I can do to get this running? Could it be that I am running 2 graphics cards with cross fire or that they are just too old? I am running a ATI Radeon HD 2900 xt and a ATI Radeon HD 4800 Series, I have also tried updating my graphics drivers but still no go.

This is the error message I am getting.

C:\Users\Boy>E:\marlin-0.9.0-win32\Start.bat

C:\Users\Boy>SET address=e4ca57b07dbb83c882636d650679e4d9ed9931f975f2c175019ae37
cfaeebc7ba8c776a3bfcc

C:\Users\Boy>SET worker=Jagerminer1x

C:\Users\Boy>SET intensity=21

C:\Users\Boy>E:\marlin-0.9.0-win32\marlin.exe -u e4ca57b07dbb83c882636d650679e4d
9ed9931f975f2c175019ae37cfaeebc7ba8c776a3bfcc.Jagerminer1x" -I 21
2016/08/28 12:49:21 Starting marlin 0.9.0
2016/08/28 12:49:21 Platform: AMD Accelerated Parallel Processing
2016/08/28 12:49:21 [0] GPU: ATI RV770

2016/08/28 12:49:21 Connecting to siamining.com:3333...
2016/08/28 12:49:21 [0] Initializing GPU: ATI RV770

2016/08/28 12:49:22 [0] cl: build error on "ATI RV770\x00\x00\x00\x00\x00\x00\x0
0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0
0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0
0\x00\x00\x00\x00\x00\x00\x00": "C:\Users\Boy\AppData\Local\Temp\OCL94F1.tmp.cl"
, line 148: error: write to <
32 bits via pointer not allowed unless cl_khr_byte_addressable_store
is enabled
output[((__global uchar *)(output+0xff))[0]++] = ENC64LE(m[4]);
^

1 error detected in the compilation of "C:\Users\Boy\AppData\Local\Temp\OCL94F1.
tmp.cl".

Internal error: clc compiler invocation failed.

C:\Users\Boy>

Getting error message the trying to run the 'Start.bat' file browsing