Low hashrate on Merlin miner

[thorep]

Hello ! I have just started mining sia coin. I use a Nvidia 1050ti 4gb card.
I get a hash rate of about: 600MH/s .

I have seen it alot higher in other miners , like nicehash.

Any suggestions about what i can do? I have set intensicty to 30.

[th3f4tc4t]

My gtx 1050 has 500Mh/s ans cap at 600mh/s when overclocked... im supose than 600mh/s is the normal hashrate with gtx 1050 ti with base clock... try a tiny overclock of +100 to 150 for the clock and downclock the memory clock for keep the target for the tdp...

[bryan]

@thorep 600 is about right. The 50 series is not very powerful.

[thorep]

Thanks for reply.

Is there a good site that i can check hashrate of cards? Want to buy some used.
And What is a good dollar to hash ratio to See if used card is priced right?

[chrisscott666]

https://whattomine.com

it catches you out at first, you need to change your electric costs (mine is about 0.3 dollar per kwh, 15p)

then you click on the card you want (if you just put the number it wont work, you need to highlight that card by clicking on it) and enter the number of them your going to use

it dosent have 1080 ti as i found out but 6 of them is the same as 8 1080 roughly (so 1 is the same as 1.3)

chris

[xurious]

Hashrate also changes by what algo you are using.

When you say "Nicehash" was faster, what was it mining?

[chrisscott666]

1080ti now added ;o) https://whattomine.com just gets better