Socket connect failed: Connection refused !!!
-
I got my A3 few days ago, wanted to support luxor east server, entered their url details and keep getting an error message Socket connect failed: Connection refused.
Miner was running, rebooted it few times.
After hard reset to default settings with Bitmain Antpool urls, my A3 was up and running.
Could s.o. suggest how to fix this issue so I can support Luxor instead?
P.S. I am not angry :)
Thank you in advance,
-
@AngryBeaver
Can you post your configuration info or screenshots?0Find me on the Official Sia Discord.
Feel free to donate and support me!
SC: e8f701c1b2b37c8560cd9bbd2ab85e352d27112f51f0cec815a1331dcc2257392f6b53440b4c
DCR: DsSKZQkB1MZ81o5DtePbmC3swPCzgbtdg6f
ETH/ETC: 0x5d67690768F0Fc4780c578393Ca567e5bCb38378
-
@SandBlock
First of all, thank you in advance for helping out.These screenshots with bitmain default pool settings:
https://imageshack.com/a/img923/8279/jjzBqh.png
https://imageshack.com/a/img922/8486/rgj5us.png
https://imageshack.com/a/img924/5967/F05ed8.png
https://imageshack.com/a/img924/3934/gEaICT.png
https://imageshack.com/a/img923/3123/LAEIyh.png
https://imageshack.com/a/img923/2976/FAuQGV.pngAnd these are with luxor settings in miner configuration:
https://imageshack.com/a/img923/4189/pB3Cz0.png
https://imageshack.com/a/img922/1600/R2szmZ.png
https://imageshack.com/a/img922/6453/NtRJa9.png
https://imageshack.com/a/img924/7041/EOK356.pngI also downloaded firmware upgrade and installation went well.
https://imageshack.com/a/img924/2286/W5Tbm5.png
I also reset my router to default settings and was able to connect to antpool with default settings but no luck with luxor.
Appreciate the help
-
@AngryBeaver
Try removingstratum+tcp://
from the URL to see if it works? Luxor's guide to setup A3 did not includestratum+tcp://
. You may also try usingx
as the password because one of the screenshot show the password asx
even if the guide mention the password as123
. You can check the guide here: https://medium.com/@LuxorTechTeam/how-to-setup-your-bitmain-a3-442fd383f718You can find Luxor Devs and community here: https://discord.gg/dCu2wQX
0Find me on the Official Sia Discord.
Feel free to donate and support me!
SC: e8f701c1b2b37c8560cd9bbd2ab85e352d27112f51f0cec815a1331dcc2257392f6b53440b4c
DCR: DsSKZQkB1MZ81o5DtePbmC3swPCzgbtdg6f
ETH/ETC: 0x5d67690768F0Fc4780c578393Ca567e5bCb38378
-
Tnx the the reply. Followed your instructions, removed stratum, corrected the passwords even tried to use static protocol, yet no luck:(
-
Hi SandBlock,
I did try again and getting the same error Socket connect failed: Connection refused.
Then I did hard reset with antpool settings (startum, ports etc) and it works.
I am bugging you, because I am from Toronto and would like to support Luxor.
-
@AngryBeaver
I'm not sure what's wrong unfortunately :(
I do not own any A3 so I am not sure what will work.
I recommend you joining Luxor's discord channel and get help there0Find me on the Official Sia Discord.
Feel free to donate and support me!
SC: e8f701c1b2b37c8560cd9bbd2ab85e352d27112f51f0cec815a1331dcc2257392f6b53440b4c
DCR: DsSKZQkB1MZ81o5DtePbmC3swPCzgbtdg6f
ETH/ETC: 0x5d67690768F0Fc4780c578393Ca567e5bCb38378
-
@AngryBeaver Remove all this: stratum+tcp:// and it should work with no problem